Reply to thread

Message

<blockquote data-quote="Dan McCoy" data-source="post: 122655" data-attributes="member: 6924">Two Weird Bugs in X32editHey Behringer team:&nbsp;&nbsp; Found two oddities in X32edit with 2.04.1) connected to x32 remotely over a VPN.&nbsp; I successfully connected with no issues.&nbsp; Was able to see the board being controlled and also control board.&nbsp;&nbsp; Also was able to load scenes etc.&nbsp;&nbsp; However on both the snippets page and the scenes page in x32edit, when I clicked on the CONSOLE button, they were blank.&nbsp;&nbsp; The CUES tab was populated with whats on the board minus the scene names.&nbsp;&nbsp; I had someone who was in the house confirm that the board entries were not blank.&nbsp;&nbsp; I tried the same thing with an x32rack in the same remote network as the x32 and it was fine.&nbsp;&nbsp; I have not been at the site to try the same thing while physically on the network.2) Had a board configuration with channels 14-16 empty (no name and black scribble strip) but channels 17-32 populated.&nbsp;&nbsp; When I click from 1-16 layer to the 17-32 layer and then back to the 1-16 layer, the names for channels 31-32 stay visible in channels 15-16 slots.&nbsp; (they are only visible on the fader, not when I click on the channel and go to the scribble strip.)&nbsp; To clear the erroneous entry I have to click on the AUX/FX layer and then back to the 1-16 and it clears.</blockquote>

[QUOTE="Dan McCoy, post: 122655, member: 6924"] Two Weird Bugs in X32edit Hey Behringer team: Found two oddities in X32edit with 2.04. 1) connected to x32 remotely over a VPN. I successfully connected with no issues. Was able to see the board being controlled and also control board. Also was able to load scenes etc. However on both the snippets page and the scenes page in x32edit, when I clicked on the CONSOLE button, they were blank. The CUES tab was populated with whats on the board minus the scene names. I had someone who was in the house confirm that the board entries were not blank. I tried the same thing with an x32rack in the same remote network as the x32 and it was fine. I have not been at the site to try the same thing while physically on the network. 2) Had a board configuration with channels 14-16 empty (no name and black scribble strip) but channels 17-32 populated. When I click from 1-16 layer to the 17-32 layer and then back to the 1-16 layer, the names for channels 31-32 stay visible in channels 15-16 slots. (they are only visible on the fader, not when I click on the channel and go to the scribble strip.) To clear the erroneous entry I have to click on the AUX/FX layer and then back to the 1-16 and it clears. [/QUOTE]

Verification