Reply to thread

Message

<blockquote data-quote="Dan McCoy" data-source="post: 123568" data-attributes="member: 6924">Re: CARE TEAM - need help. Audio Dropouts on AES50[ATTACH]153601[/ATTACH]Glenn, Sorry for the delay but I&#039;ve been absent from the forums due to other commitments.&nbsp;&nbsp; Yes I am using ethercons and the cable is from BAFO.&nbsp; It&#039;s STP (stranded)&nbsp; it&#039;s being rolled and unrolled each week and laid on the floor.&nbsp; This problem started right out of the gate.&nbsp;&nbsp; During the service we have not had any issues except once.&nbsp;&nbsp; E200534 B C(UL) CMH 26AWG/4P&nbsp; STP ETL&nbsp;&nbsp; Verified to TIA/EIA-568-B.2&nbsp; CAT.5&nbsp; ENHANCED&nbsp; 350MHZ&nbsp; PATCH CABLE&nbsp;&nbsp; FT4--- Rohs Compliant&nbsp; ELTOP Electronics.&nbsp;&nbsp; I have the spec sheet on the cable.&nbsp; It&#039;s Bare Copper.&nbsp; The Conductors are wrapped in a transparent Plastic (Mylar) and then there is an aluminum foil shield with a drain wire.&nbsp;&nbsp; I&#039;ve attached the specs</blockquote>

[QUOTE="Dan McCoy, post: 123568, member: 6924"] Re: CARE TEAM - need help. Audio Dropouts on AES50 [ATTACH=CONFIG]153601.vB5-legacyid=10125[/ATTACH] Glenn, Sorry for the delay but I've been absent from the forums due to other commitments. Yes I am using ethercons and the cable is from BAFO. It's STP (stranded) it's being rolled and unrolled each week and laid on the floor. This problem started right out of the gate. During the service we have not had any issues except once. E200534 B C(UL) CMH 26AWG/4P STP ETL Verified to TIA/EIA-568-B.2 CAT.5 ENHANCED 350MHZ PATCH CABLE FT4--- Rohs Compliant ELTOP Electronics. I have the spec sheet on the cable. It's Bare Copper. The Conductors are wrapped in a transparent Plastic (Mylar) and then there is an aluminum foil shield with a drain wire. I've attached the specs [/QUOTE]

Verification