Need Help!
I've been running X32s for almost two years. I started with two full size X32s, but have settled in with an X32 Compact and X32 Core. Up until last night, anytime something seemed amiss, I've been able to quickly find the issue. Things like a channel not working, then realizing it was assigned to two DCAs, one of which was muted.
But, last night I was using the Core and two S16s and noticed when I turned on phantom power to channel 14, it also turned on phantom to channel 15. Turning either channel's phantom off, turned off both. I re-patched channels so I wasn't using snake input 15 and the rest of the night went smoothly.
So this morning I set up my Core, which is in a rack with one S16. First thing I did, was load a different scene, and the issue went away. So I reloaded the scene from last night, and the issue returned.
To complicate further, if I swap banks on the Home tab of the Routing page (AES A1-8, assigned to inputs 9-16) the problem shows up on snake inputs 6 & 7 of the snake. So it seems like it's always the 6th and 7th input of any AES50 group assigned to input banks 9-16, no matter what mixer channel they are assigned to, or even if they are not assigned. Turning on 48v to one, turns it on to the other. Adjust the gain on either and it's mimicked on the other.
Only on a few scenes.
No channels are linked. I even routed the two offending snake inputs to two channels that I could link and unlink. Problem still exists.
Of course I can create a new scene after initializing the X32, or use a scene without the issue as a starting point, but I'd like to know if it's a glitch, or some configuration that I'm missing.
Any thoughts?
