Reply to thread

Message

<blockquote data-quote="Christian Boche" data-source="post: 56671" data-attributes="member: 1698">re: X32 DiscussionYou are welcome<img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":-)" title="Smile&nbsp; &nbsp; :-)"&nbsp; data-smilie="1"data-shortname=":-)" />Sure, it is possible. Just connect all inputs to the monitor console on stage and hook up the FOH desk via AES50 and one CAT5 cable. The FoH desk gets all the inputs via AES50 form the X32 monitor desk. Sure, you have to share the gain. The FOH desk has only a digital trim for each channel, when working as slave desk. And you have to decise, how do you get your Main sends back to stage. You could use a small analog return core, or you can send back up to four lines via AES50. The downside is, that this will eat up 4 of the 16 mixbus outs of your monitor desk. The most professional solution would be to use a analog splitter like four of this--&gt;<a href="http://www.thomann.de/gb/the_tracks_eight.htm" target="_blank">the t.racks Eight - Thomann UK Cyberstore</a>Patch your mikes in this unit and use one splitt out to connect the mikes to your S-16 digital stagebox going to Foh, and the second splitt you can patch directly in the local XLR inputs of the X32 monitor desk. No need for gain sharing at all.ChristianBTW: Just was told, that the &quot;annoying&quot; DCA/SendsOnFader problem (I montioned some posts back) is just a user fault. Once in &quot;sends on fader&quot; there is no need to push the SoF-Button again. Just push the DCA button directly to exit the SoF-Mode. I was just plain stupid, never tried that, but it works and it speeds up the workflow.Christian</blockquote>

[QUOTE="Christian Boche, post: 56671, member: 1698"] re: X32 Discussion You are welcome:-) Sure, it is possible. Just connect all inputs to the monitor console on stage and hook up the FOH desk via AES50 and one CAT5 cable. The FoH desk gets all the inputs via AES50 form the X32 monitor desk. Sure, you have to share the gain. The FOH desk has only a digital trim for each channel, when working as slave desk. And you have to decise, how do you get your Main sends back to stage. You could use a small analog return core, or you can send back up to four lines via AES50. The downside is, that this will eat up 4 of the 16 mixbus outs of your monitor desk. The most professional solution would be to use a analog splitter like four of this--> [URL="http://www.thomann.de/gb/the_tracks_eight.htm"]the t.racks Eight - Thomann UK Cyberstore[/URL] Patch your mikes in this unit and use one splitt out to connect the mikes to your S-16 digital stagebox going to Foh, and the second splitt you can patch directly in the local XLR inputs of the X32 monitor desk. No need for gain sharing at all. Christian BTW: Just was told, that the "annoying" DCA/SendsOnFader problem (I montioned some posts back) is just a user fault. Once in "sends on fader" there is no need to push the SoF-Button again. Just push the DCA button directly to exit the SoF-Mode. I was just plain stupid, never tried that, but it works and it speeds up the workflow. Christian [/QUOTE]

Verification