Reply to thread

Message

<blockquote data-quote="Per SÃ¸vik" data-source="post: 58461" data-attributes="member: 1285">re: X32 DiscussionTotally agree. I don&#039;t buy the argument that it is not worth it to sacrifice half the channels, how often does anybody record more than 16 channels simultaniously in a studio setting? Even if there is not enough firmware memory to have both implementations residing on the board, many users would happily perform a firmware update each time there was a need to change rates. S16 would of course need an update as well to be able to perform as a 96K-8in-4out device, but unless there is something hardwired in the AES50 interface, it should most likely be possible. Who knows, the S16 might even have enough AD/DA chips onboard to do 96K-16in-8out.&nbsp; Allthough this is pure speculation on my behalf, I believe that the mixer will output all movements as continous controllers, which can be patched to the DAW. It might take a midi routing and processing plugin to do so, and of course doing the patchwork and building a template in the DAW, but it should be quite possible.</blockquote>

[QUOTE="Per SÃ¸vik, post: 58461, member: 1285"] re: X32 Discussion Totally agree. I don't buy the argument that it is not worth it to sacrifice half the channels, how often does anybody record more than 16 channels simultaniously in a studio setting? Even if there is not enough firmware memory to have both implementations residing on the board, many users would happily perform a firmware update each time there was a need to change rates. S16 would of course need an update as well to be able to perform as a 96K-8in-4out device, but unless there is something hardwired in the AES50 interface, it should most likely be possible. Who knows, the S16 might even have enough AD/DA chips onboard to do 96K-16in-8out. Allthough this is pure speculation on my behalf, I believe that the mixer will output all movements as continous controllers, which can be patched to the DAW. It might take a midi routing and processing plugin to do so, and of course doing the patchwork and building a template in the DAW, but it should be quite possible. [/QUOTE]

Verification