Reply to thread

Message

<blockquote data-quote="Uwe Riemer" data-source="post: 59218" data-attributes="member: 394">re: X32 DiscussionHi guys,our X32 arrived at saturday, the other soundguy in my small company made himself familiar with the console within two hours and took it out to his gig, 14 Inputs, 5 monitor mixes and FOH mix. No problem at all, he got more compliments as usual from the audience XiControl worked ( Mix position was from the side of the stage )Today we digged a little deeper in the console:- True EQ does what it says, adjacent filters add without ripple - latency behaves as promised- routing to subgroups works by unmuting the channel in Sends on Fader Mode, while the sub group is selectedbut I found some minor things that I would like to discuss:- muting a DCA does not light up the involved channel mutes- mix busses ( spelling JR ? ) can only be changed in pairs to Pre/Post fader or Sub group- I can assign only the FX page to an UDK, if this FX is Dual Mono for example GEQ, this page has two layers, so I need to press another button to get to the other layeroverall this thing is killer like Uli Behringer promised in Frankfurt, so thank you for this productUwe</blockquote>

[QUOTE="Uwe Riemer, post: 59218, member: 394"] re: X32 Discussion Hi guys, our X32 arrived at saturday, the other soundguy in my small company made himself familiar with the console within two hours and took it out to his gig, 14 Inputs, 5 monitor mixes and FOH mix. No problem at all, he got more compliments as usual from the audience XiControl worked ( Mix position was from the side of the stage ) Today we digged a little deeper in the console: - True EQ does what it says, adjacent filters add without ripple - latency behaves as promised - routing to subgroups works by unmuting the channel in Sends on Fader Mode, while the sub group is selected but I found some minor things that I would like to discuss: - muting a DCA does not light up the involved channel mutes - mix busses ( spelling JR ? ) can only be changed in pairs to Pre/Post fader or Sub group - I can assign only the FX page to an UDK, if this FX is Dual Mono for example GEQ, this page has two layers, so I need to press another button to get to the other layer overall this thing is killer like Uli Behringer promised in Frankfurt, so thank you for this product Uwe [/QUOTE]

Verification