Reply to thread

Message

<blockquote data-quote="Eric Hill - USA" data-source="post: 59867" data-attributes="member: 2100">RMA&#039;dWell, we received our X32 today.Unfortunately, I’ve already had to request an RMA from Musician&#039;s Friend.Two problems with it, right out of the box:- Channel 16 is noisy, at least on the meter. When the gain on the channel reaches +48, the meter starts showing signal. This does not happen on any other channel. (The meters show no signal, even at +60.) So, there’s 10-11 dB of noise on Channel 16, relative to the same setting on other channels. (As an aside, I did do a factory reset, and confirmed there’s nothing configured differently on the channel, relative to the others.)- The fader on Channel 12 is noisy. It “chatters” when it’s controlled with another channel. Visually, through the fader slot, I can see the belt vibrating. (For example, when the Aux/Fx Return layer is selected, it&#039;s grouped with Channel 11. When I move Channel 11, Channel 12 follows. But, it&#039;s loud. &quot;Chatter&quot; is the best word I can use to describe the noise.) It&#039;s also noisy when moved by the push encoder under the screen.Musician&#039;s Friend is now back-ordered. Who knows when we&#039;ll get the replacement.</blockquote>

[QUOTE="Eric Hill - USA, post: 59867, member: 2100"] RMA'd Well, we received our X32 today. Unfortunately, I’ve already had to request an RMA from Musician's Friend. Two problems with it, right out of the box: - Channel 16 is noisy, at least on the meter. When the gain on the channel reaches +48, the meter starts showing signal. This does not happen on any other channel. (The meters show no signal, even at +60.) So, there’s 10-11 dB of noise on Channel 16, relative to the same setting on other channels. (As an aside, I did do a factory reset, and confirmed there’s nothing configured differently on the channel, relative to the others.) - The fader on Channel 12 is noisy. It “chatters” when it’s controlled with another channel. Visually, through the fader slot, I can see the belt vibrating. (For example, when the Aux/Fx Return layer is selected, it's grouped with Channel 11. When I move Channel 11, Channel 12 follows. But, it's loud. "Chatter" is the best word I can use to describe the noise.) It's also noisy when moved by the push encoder under the screen. Musician's Friend is now back-ordered. Who knows when we'll get the replacement. [/QUOTE]

Verification