Reply to thread

Message

<blockquote data-quote="Jaap Geurts van Kessel" data-source="post: 63782" data-attributes="member: 2232">re: X32 DiscussionWell that&#039;s true. This is the first digital mixer I&#039;ve ever used and I&#039;m astounded just how many possibilities is has.I&#039;ve routed the signal from input 1 DIRECTLY to channels 1,2,3,4,5,6,7 and 8. No problems there. I get audio from all outputs. If I route it from input 1 DIRECTRY to 9,10,11,12,13,14,15 and 16 I don&#039;t get any signal although the visual in/out overview SAYS it does. I mean, that&#039;s not how it&#039;s supposed to work right? As I stated before: I&#039;m using the mixer in it&#039;s absolute default settings. I haven&#039;t routed anything anywhere. (exept the routing stated above) There is no use in me uploading a zip cause I changed nothing to the mixer. Anyone can try it: Restore the x32 to factory defaults and check if output 15 and 16 actually work. You can see it on the photo I&#039;ve uploaded:It shows output signal on output channels 7/8 (which I routed as a test) and output channels 15/16If I connect speakers to output 7/8 I can hear sound. If I connect speakers to output 15/16 I cannot hear sound.It&#039;s not exactly rocket-science. I&#039;m starting to believe I&#039;m doing nothing wrong here and the mixer is just defective.</blockquote>

[QUOTE="Jaap Geurts van Kessel, post: 63782, member: 2232"] re: X32 Discussion Well that's true. This is the first digital mixer I've ever used and I'm astounded just how many possibilities is has. I've routed the signal from input 1 DIRECTLY to channels 1,2,3,4,5,6,7 and 8. No problems there. I get audio from all outputs. If I route it from input 1 DIRECTRY to 9,10,11,12,13,14,15 and 16 I don't get any signal although the visual in/out overview SAYS it does. I mean, that's not how it's supposed to work right? As I stated before: I'm using the mixer in it's absolute default settings. I haven't routed anything anywhere. (exept the routing stated above) There is no use in me uploading a zip cause I changed nothing to the mixer. Anyone can try it: Restore the x32 to factory defaults and check if output 15 and 16 actually work. You can see it on the photo I've uploaded: It shows output signal on output channels 7/8 (which I routed as a test) and output channels 15/16 If I connect speakers to output 7/8 I can hear sound. If I connect speakers to output 15/16 I cannot hear sound. It's not exactly rocket-science. I'm starting to believe I'm doing nothing wrong here and the mixer is just defective. [/QUOTE]

Verification