Reply to thread

Message

<blockquote data-quote="Donald P Leaman" data-source="post: 64561" data-attributes="member: 1762">re: X32 DiscussionThe 3rd picture is your issue.&nbsp; You have a couple ways to get the DAW returned to the X32:1) Just return the DAW L/R (master) channels - do this by configuring &quot;Card 1-4&quot; in the &quot;Aux In 1-4&quot; in ROUTING-&gt;HOME.&nbsp; Then, you can set your DAW to use either 1-2 or 3-4 as your master return - you can find your returns on the 3rd layer (Aux In / USB FX Returns), faders 1-42) To route ALL your channels from the DAW back to the X32 (as a &quot;virtual soundcheck&quot;, for example), In the ROUTING-&gt;HOME screen, in each of the &quot;Inputs ...&quot; columns, scroll down to the bottom of the list and select &quot;Card &lt;x&gt;-&lt;y&gt;&quot;.&nbsp; A simple routing would be, Inputs 1-8 get their signal from Card 1-8, and so on....&nbsp; Don&#039;t forget to set up any appropriate routing in the DAW to line up the channels correctly.Hope this helps!Don</blockquote>

[QUOTE="Donald P Leaman, post: 64561, member: 1762"] re: X32 Discussion The 3rd picture is your issue. You have a couple ways to get the DAW returned to the X32: 1) Just return the DAW L/R (master) channels - do this by configuring "Card 1-4" in the "Aux In 1-4" in ROUTING->HOME. Then, you can set your DAW to use either 1-2 or 3-4 as your master return - you can find your returns on the 3rd layer (Aux In / USB FX Returns), faders 1-4 2) To route ALL your channels from the DAW back to the X32 (as a "virtual soundcheck", for example), In the ROUTING->HOME screen, in each of the "Inputs ..." columns, scroll down to the bottom of the list and select "Card <x>-<y>". A simple routing would be, Inputs 1-8 get their signal from Card 1-8, and so on.... Don't forget to set up any appropriate routing in the DAW to line up the channels correctly. Hope this helps! Don [/QUOTE]

Verification