Reply to thread

Message

<blockquote data-quote="Forrest Houghton" data-source="post: 64988" data-attributes="member: 972">re: X32 DiscussionGot my X32 a couple days ago, and I have to say that I am thoroughly pleased with it. After a quick firmware update (or should I say not so quick. Took awhile to find a flashdrive that the X32 would recognize, but once I found one it went through the update quickly.) from 1.03 to 1.08, I went through the list of things to check and luckily nothing is wrong. Got the XControl setup with it in two seconds. Nice and easy unlike Studio Manager. I did have a little trouble setting up the XUF card, only because I am a newbie when it comes to Reaper, but after fiddling around with the software I was able to figure how to playback multitracks through the console. One of the things I would like to see with the XControl editor is the ability map midi controllers to it. f.e. I have an APC 40 and would like to map some of the knobs to control some parameters on the console, but still be wireless. Most editors I have seen have this ability, so it may be something to consider to implement in the final release. The other thing I am going to look into this weekend is to somehow get TouchOSC on my Android phone to talk with either the console or the editor, since there is not an Android app yet. I am not too familiar when it comes to OSC or MIDI over Wifi so any advice would be helpful.</blockquote>

[QUOTE="Forrest Houghton, post: 64988, member: 972"] re: X32 Discussion Got my X32 a couple days ago, and I have to say that I am thoroughly pleased with it. After a quick firmware update (or should I say not so quick. Took awhile to find a flashdrive that the X32 would recognize, but once I found one it went through the update quickly.) from 1.03 to 1.08, I went through the list of things to check and luckily nothing is wrong. Got the XControl setup with it in two seconds. Nice and easy unlike Studio Manager. I did have a little trouble setting up the XUF card, only because I am a newbie when it comes to Reaper, but after fiddling around with the software I was able to figure how to playback multitracks through the console. One of the things I would like to see with the XControl editor is the ability map midi controllers to it. f.e. I have an APC 40 and would like to map some of the knobs to control some parameters on the console, but still be wireless. Most editors I have seen have this ability, so it may be something to consider to implement in the final release. The other thing I am going to look into this weekend is to somehow get TouchOSC on my Android phone to talk with either the console or the editor, since there is not an Android app yet. I am not too familiar when it comes to OSC or MIDI over Wifi so any advice would be helpful. [/QUOTE]

Verification