Reply to thread

Message

<blockquote data-quote="Nic Morris" data-source="post: 65541" data-attributes="member: 2432">re: X32 DiscussionHello,Long time reader etc. etc.. I bought an x32 solely off the back of this thread&nbsp; which has gone straight into service as the house console for the&nbsp; second room (250 cap) in a popular UK music venue.&nbsp; 2x S16&#039;s will be the&nbsp; next purchase.&nbsp; Thank you everyone for such useful information and&nbsp; thank you Behringer for such a great console.I have one question and some feature requests <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" />Question:-&nbsp; When setting global mix bus post/pre (select mix bus/config) is it&nbsp; correct that this only applies to inputs 1-32 and not aux ins/fx&nbsp; returns?&nbsp; I couldn&#039;t think of a reason why you would specifically not&nbsp; want to affect other inputs as well given that you could always adjust&nbsp; them manually should you wish.&nbsp; It felt a bit long-winded to have to set&nbsp; all the aux and fx&#039;s manually, even if this was achieved with&nbsp; copy/paste.&nbsp; I&#039;m trying to decide if this is a bug or feature request.Feature Requests:(Apologies if these already exist.&nbsp; I&#039;ve read everything but I also easily forget!)-&nbsp; Assign keys/send on faders disable sof &amp; return to previous page on&nbsp; second press.&nbsp; This has been requested by every engineer who has looked&nbsp; at the console and is how consoles such as M7 behave.&nbsp; The send on&nbsp; fader shortcut is great but there is currently no quick way out once&nbsp; you&#039;re there.- Assign keys/jump to page additional option to&nbsp; define page layers where applicable.&nbsp; Specifically for dual graphic EQ&nbsp; to assign keys that switch directly to channels A or B.&nbsp; This is useful&nbsp; for maximising FX slots for stage monitoring while also providing quick&nbsp; shortcuts to a particular mix EQ.&nbsp; At the moment you must either&nbsp; remember to check your layer or waste slots.- FX controls on&nbsp; fader (like GEQ on fader but for all FX).&nbsp; I managed to make this happen&nbsp; once but can&#039;t work out how so I assume it was not intentional.&nbsp;&nbsp; However, I thought it was a cool and all my engineers agreed.-&nbsp; FX mute and/or bypass options from the individual pages.&nbsp; Similarly,&nbsp; choose FX and routing.&nbsp; At the moment you must setup everything from the&nbsp; FX home page but I felt there is some room to provide an alternative&nbsp; route to the same settings directly from the individual FX pages&nbsp; themselves.- Provide a shortcut to set mix bus and DCA faders to&nbsp; 0dB.&nbsp; Similar to the way you can zero GEQ on faders with the mute key&nbsp; it would be useful to be able to quickly set your mix bus masters at&nbsp; zero.- Provide a way to select all six bands of mix bus/master&nbsp; EQ from the EQ section.&nbsp; At the moment you must use the soft screen&nbsp; controls to access two of the bands which feels a bit clunky.&nbsp; Perhaps&nbsp; you could toggle controls between a couple of bands using the low/hi&nbsp; band buttons?I think that is all for now.&nbsp; Thank you for listening!</blockquote>

[QUOTE="Nic Morris, post: 65541, member: 2432"] re: X32 Discussion Hello, Long time reader etc. etc.. I bought an x32 solely off the back of this thread which has gone straight into service as the house console for the second room (250 cap) in a popular UK music venue. 2x S16's will be the next purchase. Thank you everyone for such useful information and thank you Behringer for such a great console. I have one question and some feature requests :) Question: - When setting global mix bus post/pre (select mix bus/config) is it correct that this only applies to inputs 1-32 and not aux ins/fx returns? I couldn't think of a reason why you would specifically not want to affect other inputs as well given that you could always adjust them manually should you wish. It felt a bit long-winded to have to set all the aux and fx's manually, even if this was achieved with copy/paste. I'm trying to decide if this is a bug or feature request. Feature Requests: (Apologies if these already exist. I've read everything but I also easily forget!) - Assign keys/send on faders disable sof & return to previous page on second press. This has been requested by every engineer who has looked at the console and is how consoles such as M7 behave. The send on fader shortcut is great but there is currently no quick way out once you're there. - Assign keys/jump to page additional option to define page layers where applicable. Specifically for dual graphic EQ to assign keys that switch directly to channels A or B. This is useful for maximising FX slots for stage monitoring while also providing quick shortcuts to a particular mix EQ. At the moment you must either remember to check your layer or waste slots. - FX controls on fader (like GEQ on fader but for all FX). I managed to make this happen once but can't work out how so I assume it was not intentional. However, I thought it was a cool and all my engineers agreed. - FX mute and/or bypass options from the individual pages. Similarly, choose FX and routing. At the moment you must setup everything from the FX home page but I felt there is some room to provide an alternative route to the same settings directly from the individual FX pages themselves. - Provide a shortcut to set mix bus and DCA faders to 0dB. Similar to the way you can zero GEQ on faders with the mute key it would be useful to be able to quickly set your mix bus masters at zero. - Provide a way to select all six bands of mix bus/master EQ from the EQ section. At the moment you must use the soft screen controls to access two of the bands which feels a bit clunky. Perhaps you could toggle controls between a couple of bands using the low/hi band buttons? I think that is all for now. Thank you for listening! [/QUOTE]

Verification