Reply to thread

Message

<blockquote data-quote="Jaap Geurts van Kessel" data-source="post: 65861" data-attributes="member: 2232">re: X32 DiscussionFirst you have to make sure is fat32 formatted. I&#039;ve had a 16GB fat32 stick that worked fine with the x32, but I couln&#039;t update my firmware with it. Tried an old 1GB one and it worked fine (it was a brandless formula-1 style usb-stick). It&#039;s a little bit trial and error...A totally different question: I use the X32 with the P16 monitoring system. Does anyone know how can I add reverb to a single P16 channel? I tried to add reverb to the guitar channel but couln&#039;t make it work. I&#039;m a beginner when it comes to mixing so maybe I just overlooked something.I chose the following for the p16 channel: Dir-out channel 1--&gt;pre-faderOf course there is no reverb on the channel nowSo I tried the reverb effect as a insert on the same channel. But now there is ONLY reverb.Can anyone help me?</blockquote>

[QUOTE="Jaap Geurts van Kessel, post: 65861, member: 2232"] re: X32 Discussion First you have to make sure is fat32 formatted. I've had a 16GB fat32 stick that worked fine with the x32, but I couln't update my firmware with it. Tried an old 1GB one and it worked fine (it was a brandless formula-1 style usb-stick). It's a little bit trial and error... [B]A totally different question:[/B] I use the X32 with the P16 monitoring system. Does anyone know how can I add reverb to a single P16 channel? I tried to add reverb to the guitar channel but couln't make it work. I'm a beginner when it comes to mixing so maybe I just overlooked something. I chose the following for the p16 channel: Dir-out channel 1-->pre-fader Of course there is no reverb on the channel now So I tried the reverb effect as a insert on the same channel. But now there is ONLY reverb. Can anyone help me? [/QUOTE]

Verification