Reply to thread

Message

<blockquote data-quote="Jan Tapak" data-source="post: 66274" data-attributes="member: 1294">re: X32 DiscussionPer,Thank you for info.On Saturday both X32s came.I immediately update them from firmware 1.02 to 1.09.Both of them have noise on channel 16 and 32.I was able configure them: X32 (monitor)-X32 (FOH) and via Fiwi (32 inputs-8outputs) running VSTs on the host (Reaper or Studio One). It was quite nice.&nbsp;With configuration of Fiwi 32inputs-32outputs I had some clipping and I suppose latency as well. More investigation is necessary from my side.&nbsp;In the PC, I used internal Fiwi , because external Fiwi 800 express card&nbsp; with TI chipset have seen only X32 card and was impossible for me to configure to see inputs an outputs on Behringer’s Fiwi driver.&nbsp;Next step for me is to check using of remote control for both X32 via Ethernet port and via power line. On FOH I would like to use Edimax AV Powerline Fast Ethernet Bridge with switch for connection of PC and X32(FOH) and for X32(Monitor mix) only use Edimax AV Powerline Fast Ethernet Bridge.</blockquote>

[QUOTE="Jan Tapak, post: 66274, member: 1294"] re: X32 Discussion Per, Thank you for info. On Saturday both X32s came. I immediately update them from firmware 1.02 to 1.09. Both of them have noise on channel 16 and 32. I was able configure them: X32 (monitor)-X32 (FOH) and via Fiwi (32 inputs-8outputs) running VSTs on the host (Reaper or Studio One). It was quite nice. With configuration of Fiwi 32inputs-32outputs I had some clipping and I suppose latency as well. More investigation is necessary from my side. In the PC, I used internal Fiwi , because external Fiwi 800 express card with TI chipset have seen only X32 card and was impossible for me to configure to see inputs an outputs on Behringer’s Fiwi driver. Next step for me is to check using of remote control for both X32 via Ethernet port and via power line. On FOH I would like to use Edimax AV Powerline Fast Ethernet Bridge with switch for connection of PC and X32(FOH) and for X32(Monitor mix) only use Edimax AV Powerline Fast Ethernet Bridge. [/QUOTE]

Verification