Re: Using the X32 for Corporate Shows
Hi Brian,
It sounds like for this application you would want to configure your bus sends as subgroups rather than post fader sends.
To do so, select the input channel you wish to send to the group and press view near the Bus Send rotary encoders.
By pressing the LAYER down arrow by the screen, you will reveal the option to change between pre/post fader, pre/post EQ, and subgroup.
When you choose subgroup on a pair of bus sends, the channel will be send to those busses and their volume and panning would track the main mix as you described.
Hope this helps,
John DiNicola
Senior Specialist, Product Support
MUSIC Group
BEHRINGER
