Reply to thread

Message

<blockquote data-quote="Robert Lofgren" data-source="post: 66764" data-attributes="member: 2447">re: X32 DiscussionFound a slight bug.Using the card input from my daw I noticed that the gate didn&#039;t operate correctly.The gate seems to trigger approx. 12dB above set value in this setup.Edit: This only happens on ch-1 as far as I can tell for now. Need to do more tests if B. Can&#039;t reproduce.Edit 2: This is possibly an user error combined with feature not clearly visible.When using the gate key filter one lowers the actual signal to trig. This is obvious when you think about it, but it makes it impossible to set the level based on meter information and one must rely on ears instead.I&#039;m not sure how this would work otherwise but somehow I&#039;d like the meter to reflect the key filter on the gate page.I hope that I make any sense...</blockquote>

[QUOTE="Robert Lofgren, post: 66764, member: 2447"] re: X32 Discussion Found a slight bug. Using the card input from my daw I noticed that the gate didn't operate correctly. The gate seems to trigger approx. 12dB above set value in this setup. Edit: This only happens on ch-1 as far as I can tell for now. Need to do more tests if B. Can't reproduce. Edit 2: This is possibly an user error combined with feature not clearly visible. When using the gate key filter one lowers the actual signal to trig. This is obvious when you think about it, but it makes it impossible to set the level based on meter information and one must rely on ears instead. I'm not sure how this would work otherwise but somehow I'd like the meter to reflect the key filter on the gate page. I hope that I make any sense... [/QUOTE]

Verification