Reply to thread

Message: <blockquote data-quote="Steve Maksim" data-source="post: 68209" data-attributes="member: 1973">Re: How to do an analog insert?One of the obvious limitations of the X32 is that it only has six pairs of sends and returns.  Of course, there's loads of "rack gear" online, so for a lot of applications six pairs isn't a problem.  But six is less than sixteen.You could connect ten of your mics to channels 17-26.  Set gain and eq, then take the direct outs to your automixer.  (I'm assuming pre-fade.  If post-fade, you'll want to change the numbering scheme to get everything in the same layer).  From the automixer, bring the channels back in on 1-10.  Use your other six mics on 11-16 with the inserts.  (This way all sixteen channels are on the same layer.)</blockquote>

Top Bottom