Reply to thread

Message

<blockquote data-quote="Per SÃ¸vik" data-source="post: 68825" data-attributes="member: 1285">Re: Recording routing questionTo record buses, you need to select buses for eight channels, reducing your direct recording capacity to 24. Now, if you don&#039;t need the buses for monitors or whatever, you could of course regain direct recording capacity by routing individual channels through buses one by one.In the &quot;ROUTING&quot; menu, &quot;card out&quot; tab, you select Out 1-8 as source for Expansion Card output 25-32In the &quot;analog out&quot; tab, you make sure that the Output 01 to Output 08 have got the corresponding MixBuses as source, except for the ones that you might want to use for direct recording input channels, then you select Direct out Ch 25, 26 --- 32 for the channels you want.The buses that you have bypassed by using direct out, can of course be used as group buses or whatever, but the corresponding outputs will be taken. You can still send them to mains, p16 etc.</blockquote>

[QUOTE="Per SÃ¸vik, post: 68825, member: 1285"] Re: Recording routing question To record buses, you need to select buses for eight channels, reducing your direct recording capacity to 24. Now, if you don't need the buses for monitors or whatever, you could of course regain direct recording capacity by routing individual channels through buses one by one. In the "ROUTING" menu, "card out" tab, you select Out 1-8 as source for Expansion Card output 25-32 In the "analog out" tab, you make sure that the Output 01 to Output 08 have got the corresponding MixBuses as source, except for the ones that you might want to use for direct recording input channels, then you select Direct out Ch 25, 26 --- 32 for the channels you want. The buses that you have bypassed by using direct out, can of course be used as group buses or whatever, but the corresponding outputs will be taken. You can still send them to mains, p16 etc. [/QUOTE]

Verification