2 + 2 X32 - possible 60ch solution
Hello
I can think of one possible way to hook up two X32 parallel on monitor end.
You can get a 64/12 to 60/16 or anyhing between with this setup. i will describe 64/12
connect the 6 AUX outputs into next X32 AUX inputs - and same the other direction.
On first desk assign these AUX signals coming from next desk into submixes 1 - 6 . Also assign the AUX 7 - 12 to go out via AUX- outputs. On second desk assign AUX 1 - 6 to go out via AUX and AUX-returns into submixes 7 - 12.
Now you have total 12 monitor outputs - six coming off each desk.
If your foh does not need all 64 inputs you can do up to 4 more x-patches via channel inputs.
Connect the two foh-desks together via AUX-jacks so that one becomes master.
If there is a need to share effect buses, I imagine the same procedure as in monitor end could be applied.
However I have only one desk and now it is time to go play with 6 year old boy, who is busy playing policeman and eagerly writes me a well deserved ticket for wasting my time at computer.
Pappa
