Reply to thread

Message

<blockquote data-quote="Nick Davis" data-source="post: 73778" data-attributes="member: 1713">Monitor outs - must be something simple.Wonder if anyone can point me in the right direction!&nbsp;Ok have had and used the x32 for some time now - but until today have not connected anything to the monitor/control room outs - all monitring being by phones.Well do not seem to be able to get any output from either the xlr outs or the TRS -Jack outs - tried bothHave tested the monitor amp with a different input source and that seems to work OK.On the monitor page the the level is set to 0.0db and there is no dim.Routing out seems to be OK - Monitor to Monitor L and R - they are set at post fader&nbsp; - but faders up as can hear through the H/PhonesOn the meters page a&nbsp; healthy signal on monitor meterOh and all cables testedIs there something simple I am missing ( just hope not a fault - &#039;cos of the inconvenience)Many thanksNick</blockquote>

[QUOTE="Nick Davis, post: 73778, member: 1713"] Monitor outs - must be something simple. Wonder if anyone can point me in the right direction! Ok have had and used the x32 for some time now - but until today have not connected anything to the monitor/control room outs - all monitring being by phones. Well do not seem to be able to get any output from either the xlr outs or the TRS -Jack outs - tried both Have tested the monitor amp with a different input source and that seems to work OK. On the monitor page the the level is set to 0.0db and there is no dim. Routing out seems to be OK - Monitor to Monitor L and R - they are set at post fader - but faders up as can hear through the H/Phones On the meters page a healthy signal on monitor meter Oh and all cables tested Is there something simple I am missing ( just hope not a fault - 'cos of the inconvenience) Many thanks Nick [/QUOTE]

Verification