Normal
Re: New Firmware - no read-only scenesThe meters on a digital mixer are DBFS, the 'FS' standing for Full Scale. At 0 DBFS you are out of 1's. It can't get louder. The actual output voltage at that point is the specified maximum output of the mixer. For the X32, that is +21dBu. If you solo an input and bring up the input trim until it peaks as -18, it's the digital equivalent of "+3 analog."
Re: New Firmware - no read-only scenes
The meters on a digital mixer are DBFS, the 'FS' standing for Full Scale. At 0 DBFS you are out of 1's. It can't get louder. The actual output voltage at that point is the specified maximum output of the mixer. For the X32, that is +21dBu. If you solo an input and bring up the input trim until it peaks as -18, it's the digital equivalent of "+3 analog."
