Reply to thread

Message

<blockquote data-quote="John DiNicola" data-source="post: 74514" data-attributes="member: 2061">Re: Change routing without losing gain settings and 48VHi Shane,Preamp settings are saved by scene. If a scene is setup and saved with a S16 (AES50) inputs, and you recall it later with an S16, preamp gain would be restored. It wouldn&#039;t matter if it was the same S16, so long as it was connected to the same AES50 port on the X32 so that routing would be consistant (and as usual the connection at the S16 was to the A port). From this point, if you changed routing on the to Local inputs, the mic gain would revert back to wherever it was previously set for the local inputs. Hi Jörgen,Thank you for your detailed response. We greatly value and consider our customer&#039;s feedback. On that note, I strongly encourage everyone to also post your specific feature requests to our BEHRINGER Forum&#039;s X32 section. You can click <a href="http://forum.behringer.com/showthread.php?154-X32-Feature-Request-and-Issue-Reporting-Thread" target="_blank">here</a> to get to the X32 Feature Request thread. In this way, we can be sure your comments are always heard. Best,John DiNicolaSenior Specialist, Product SupportMUSIC GroupBEHRINGER</blockquote>

[QUOTE="John DiNicola, post: 74514, member: 2061"] Re: Change routing without losing gain settings and 48V Hi Shane, Preamp settings are saved by scene. If a scene is setup and saved with a S16 (AES50) inputs, and you recall it later with an S16, preamp gain would be restored. It wouldn't matter if it was the same S16, so long as it was connected to the same AES50 port on the X32 so that routing would be consistant (and as usual the connection at the S16 was to the A port). From this point, if you changed routing on the to Local inputs, the mic gain would revert back to wherever it was previously set for the local inputs. Hi Jörgen, Thank you for your detailed response. We greatly value and consider our customer's feedback. On that note, I strongly encourage everyone to also post your specific feature requests to our BEHRINGER Forum's X32 section. You can click [URL="http://forum.behringer.com/showthread.php?154-X32-Feature-Request-and-Issue-Reporting-Thread"]here[/URL] to get to the X32 Feature Request thread. In this way, we can be sure your comments are always heard. Best, John DiNicola Senior Specialist, Product Support MUSIC Group BEHRINGER [/QUOTE]

Verification