Reply to thread

Message

<blockquote data-quote="Tamas Tako" data-source="post: 75421" data-attributes="member: 2591">Re: X32 Firmware 2.0- DeEsser rather on every channel (as dynamic EQ for example) in the Expander &quot;slot&quot; as on the channels where you would use DeEsser or Dyn EQ you almost never use Expander/Gate. so the double dynamics on all channels would be a real win!- Using the 3 stereo Matrixes as MIX (getting signal directly from Input channels) would be great!! (22 mix busses)or at least the ability to use then these 6 extra Mix Busses to feed the signal to the FX processors, as in case of IEM mixingevery MIX bus is needed - so there will be no MIX busses available to FX sends... This would then allow us to use 6 FX sends AND 8 Stereo IEM MIXes - HPF on the inputs: max. corner Frequency up to at least 1kHz would be great!!- Possibility to freely patch Input also to AUX input 7-8 If you dont want to use USB playback- Processing on Effects returns (at least EQ &amp; exp/gate)</blockquote>

[QUOTE="Tamas Tako, post: 75421, member: 2591"] Re: X32 Firmware 2.0 - DeEsser rather on every channel (as dynamic EQ for example) in the Expander "slot" as on the channels where you would use DeEsser or Dyn EQ you almost never use Expander/Gate. so the double dynamics on all channels would be a real win! - Using the 3 stereo Matrixes as MIX (getting signal directly from Input channels) would be great!! (22 mix busses) or at least the ability to use then these 6 extra Mix Busses to feed the signal to the FX processors, as in case of IEM mixing every MIX bus is needed - so there will be no MIX busses available to FX sends... This would then allow us to use 6 FX sends AND 8 Stereo IEM MIXes - HPF on the inputs: max. corner Frequency up to at least 1kHz would be great!! - Possibility to freely patch Input also to AUX input 7-8 If you dont want to use USB playback - Processing on Effects returns (at least EQ & exp/gate) [/QUOTE]

Verification