Reply to thread

Message

<blockquote data-quote="Robin Jacobsson" data-source="post: 82206" data-attributes="member: 3853">Re: X32 DiscussionNo problem, I&#039;ve found alot on youtube and google, but sometimes maybe I just got bad luck in searching but as in this example I can&#039;t find the solution,I&#039;m sending a channel, let&#039;s say 21 to Bus 2. In the routing I&#039;ve set Bus 2 to Aux 2 output.I connect a TS cable from Aux 2 to a monitor, and I can hear the music in the monitor when increasing channel 21 fader.But when I touch the Bus 2 fader it doesn&#039;t affect the output of the Aux 2.I&#039;ve been looking for pre/post settings such as Setup &gt; Config where Bus 1-8 is set to pre (Post EQ).Would really appreciate if you have the answer, since I have to get this running before saturday! <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" />Edit: If I don&#039;t find the solution I will just have to re-solder the TRS to XLR female &gt; TRS and send it directly from Bus 2 instead of Aux 2, but I suspect that it&#039;s really easy just that I can&#039;t find the solution. Sorry for being a pain in the ass <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f600.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":D" title="Big grin&nbsp; &nbsp; :D"&nbsp; data-smilie="8"data-shortname=":D" />~:-D~:grin:</blockquote>

[QUOTE="Robin Jacobsson, post: 82206, member: 3853"] Re: X32 Discussion No problem, I've found alot on youtube and google, but sometimes maybe I just got bad luck in searching but as in this example I can't find the solution, I'm sending a channel, let's say 21 to Bus 2. In the routing I've set Bus 2 to Aux 2 output. I connect a TS cable from Aux 2 to a monitor, and I can hear the music in the monitor when increasing channel 21 fader. But when I touch the Bus 2 fader it doesn't affect the output of the Aux 2. I've been looking for pre/post settings such as Setup > Config where Bus 1-8 is set to pre (Post EQ). Would really appreciate if you have the answer, since I have to get this running before saturday! :) Edit: If I don't find the solution I will just have to re-solder the TRS to XLR female > TRS and send it directly from Bus 2 instead of Aux 2, but I suspect that it's really easy just that I can't find the solution. Sorry for being a pain in the ass :D~:-D~:grin: [/QUOTE]

Verification