Reply to thread

Message

<blockquote data-quote="Joe Sanborn" data-source="post: 84009" data-attributes="member: 2062">Re: X32 Tech TalkHi Mike,In regards to your question about:<a href="http://forum.behringer.com/showthread.php?853-BEHRINGER-Tech-Talk-01-S16-and-X32" target="_blank">BEHRINGER Tech Talk #01: S16 and X32</a>When setting up the S16s as described in the Tech Talk article, the outputs on the 2-S16 Stage Boxes would mirror the 16 XLR outputs on the X32. This is why it instructs you to assign your outputs individually on the &quot;analog out&quot; page of the ROUTING menu. With this configuration, the first S16 would get analog outs 1-8 and the second S16 would get outs 9-16.If this is not working, check the &quot;AES50 out&quot; tab of the ROUTING menu (AES50 A or B depending on which X32 port you are using). Make sure the first two banks of outputs (AES50 Outs 1-16) are set to &quot;Out 1-8&quot; and &quot;Out 9-16.&quot; These are the default settings, which can always be recalled by &quot;initializing&quot; the console on the &quot;config&quot; tab of the SETUP menu. I hope it clarifies and helps.Best Regards,Joe SanbornManager, Channel MarketingMUSIC GroupBEHRINGER</blockquote>

[QUOTE="Joe Sanborn, post: 84009, member: 2062"] Re: X32 Tech Talk Hi Mike, In regards to your question about: [B][URL="http://forum.behringer.com/showthread.php?853-BEHRINGER-Tech-Talk-01-S16-and-X32"]BEHRINGER Tech Talk #01: S16 and X32[/URL][/B] When setting up the S16s as described in the Tech Talk article, the outputs on the 2-S16 Stage Boxes would mirror the 16 XLR outputs on the X32. This is why it instructs you to assign your outputs individually on the "analog out" page of the ROUTING menu. With this configuration, the first S16 would get analog outs 1-8 and the second S16 would get outs 9-16. If this is not working,[B] check the "AES50 out" tab of the ROUTING menu[/B] (AES50 A or B depending on which X32 port you are using). Make sure the first two banks of outputs (AES50 Outs 1-16) are set to "Out 1-8" and "Out 9-16." These are the default settings, which can always be recalled by "initializing" the console on the "config" tab of the SETUP menu. I hope it clarifies and helps. Best Regards, Joe Sanborn Manager, Channel Marketing MUSIC Group BEHRINGER [/QUOTE]

Verification