Reply to thread

Message

<blockquote data-quote="Dragos Strat" data-source="post: 91411" data-attributes="member: 4461">Re: X32 DiscussionHi Henry, You just have to press setup - preamps tab and adjust the gain of sound card preamps. (it&#039;s a different gain than the channel gain from channel strip - config/preamp section on the console) you will have all the gain in the world <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f600.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":D" title="Big grin&nbsp; &nbsp; :D"&nbsp; data-smilie="8"data-shortname=":D" />. By default, all my A/D gains was -2 so this is a low gain setting.(this is my first aiding post) I&#039;m in a hard learning process as this is my first true console (after a analog 8 channel Xenix). Hope that was the right answer for your question. So please everyone, correct me if I&#039;m wrong.P.S. I still cannot figure how to record from x32 to DAW bypasing channel preamp and only use the A/D gain. Any suggestions out there please?</blockquote>

[QUOTE="Dragos Strat, post: 91411, member: 4461"] Re: X32 Discussion Hi Henry, You just have to press setup - preamps tab and adjust the gain of sound card preamps. (it's a different gain than the channel gain from channel strip - config/preamp section on the console) you will have all the gain in the world :D. By default, all my A/D gains was -2 so this is a low gain setting. (this is my first aiding post) I'm in a hard learning process as this is my first true console (after a analog 8 channel Xenix). Hope that was the right answer for your question. So please everyone, correct me if I'm wrong. P.S. I still cannot figure how to record from x32 to DAW bypasing channel preamp and only use the A/D gain. Any suggestions out there please? [/QUOTE]

Verification