Reply to thread

Message

<blockquote data-quote="Joseph Schuurman" data-source="post: 92227" data-attributes="member: 4464">Re: Pop. crackle and feedback problemsVery good thinking Per.&nbsp; The simple MP3 test that didn&#039;t exhibit the behavior didn&#039;t have any monitors active or connected, maybe that&#039;s a key point.&nbsp; We have a stagebox, but it only handles outputs, I will verify as soon as I can.&nbsp; As for settings after scene save, there should be very minimal adjustments made after I saved out the scene files, noone touches anything significant during the mid-week events (even EQ lol) except me, at most it would be mix bus levels, gain, fader levels.Going back to the dealer was the first thing we thought we&#039;d do, but my fulltime job is a software/hardware tester, so my inclination is to find out what the problem is before going to such measures.&nbsp; The thing I&#039;d like to avoid, is going through all the trouble of packing it up, getting a replacement, and the problem still exists.&nbsp; But I&#039;m close to that.&nbsp; We&#039;re going to do 1 maybe 2 more tests.&nbsp; Today or tomorrow we&#039;re going to run with just the wireless mic&#039;s connected (and active), if that exhibits the behavior,&nbsp; I will throw a DI between them and the sound board and probably run one of our old scene files for some time and see if the problem still occurs.&nbsp; If it happens still, I will drop the wireless mic&#039;s in favor of wired for a time.&nbsp; This is as far as I think I&#039;ll go.&nbsp; I&#039;d like to thank all of you for offering suggestions, and helping me isolate down the issue, it&#039;s been invaluable to myself and my church.&nbsp; I think we&#039;re very close now.</blockquote>

[QUOTE="Joseph Schuurman, post: 92227, member: 4464"] Re: Pop. crackle and feedback problems Very good thinking Per. The simple MP3 test that didn't exhibit the behavior didn't have any monitors active or connected, maybe that's a key point. We have a stagebox, but it only handles outputs, I will verify as soon as I can. As for settings after scene save, there should be very minimal adjustments made after I saved out the scene files, noone touches anything significant during the mid-week events (even EQ lol) except me, at most it would be mix bus levels, gain, fader levels. Going back to the dealer was the first thing we thought we'd do, but my fulltime job is a software/hardware tester, so my inclination is to find out what the problem is before going to such measures. The thing I'd like to avoid, is going through all the trouble of packing it up, getting a replacement, and the problem still exists. But I'm close to that. We're going to do 1 maybe 2 more tests. Today or tomorrow we're going to run with just the wireless mic's connected (and active), if that exhibits the behavior, I will throw a DI between them and the sound board and probably run one of our old scene files for some time and see if the problem still occurs. If it happens still, I will drop the wireless mic's in favor of wired for a time. This is as far as I think I'll go. I'd like to thank all of you for offering suggestions, and helping me isolate down the issue, it's been invaluable to myself and my church. I think we're very close now. [/QUOTE]

Verification