Reply to thread

Message

<blockquote data-quote="Dick Franks" data-source="post: 98745" data-attributes="member: 2130">X32, S16 IssueI been running my X32 with two S16s without issues since last November. Saturday,while setting up for a gig, I first upgraded my X32 to firmware 1.15. When I tested the system I was getting no signal on outputs 1-8 of the first S16. Thinking it was a problem with the firmware, I downgraded to 1.13. Still no output, but now the pan wasn&#039;t working on local input 32, which I usually use to test the system. Reloaded 1.15 and still had both issues, no signal on 1-8 of the first S16, and no pan. Loaded another scene and the pan was working. Reloaded the original scene and the pan was still working.&nbsp; Still no output on 1-8 of the first S16. Then I configured the S16 as outs 9-16, rerouted my analog outs and got signal.&nbsp; Reconfigured back to 1-8, and the everything worked&nbsp; perfectly for the entire evening. So, I&#039;m not sure what happened.&nbsp; Any ideas?</blockquote>

[QUOTE="Dick Franks, post: 98745, member: 2130"] X32, S16 Issue I been running my X32 with two S16s without issues since last November. Saturday,while setting up for a gig, I first upgraded my X32 to firmware 1.15. When I tested the system I was getting no signal on outputs 1-8 of the first S16. Thinking it was a problem with the firmware, I downgraded to 1.13. Still no output, but now the pan wasn't working on local input 32, which I usually use to test the system. Reloaded 1.15 and still had both issues, no signal on 1-8 of the first S16, and no pan. Loaded another scene and the pan was working. Reloaded the original scene and the pan was still working. Still no output on 1-8 of the first S16. Then I configured the S16 as outs 9-16, rerouted my analog outs and got signal. Reconfigured back to 1-8, and the everything worked perfectly for the entire evening. So, I'm not sure what happened. Any ideas? [/QUOTE]

Verification