Re: X32 - Uli please consider the recording crowd
Gabriel,
The easiest way to do this is to follow these steps.
Press the ROUTING button, then page over to the P16 Tab. Select a P 16 Digital Output Channel of your choosing, then scroll through the Output Signal list to select the Direct Out channel that you wish to route to your CARD / SONAR. Then, on the right column, select the TAP point, Post Fader.
Finally, using the page buttons again, select the CARD tab. Now select the group of output sources you wish to send to your card. P 16 1-8, etc.
To get full 32 channel, POST sources to your DAW, my suggestion is to use the following sources;
P-16 1-8
P 16 9-16
Out 1-8
Out 9-16
If you have any further questions, feel free to let me know.
Dennie Edwards
Specialist, Product Support
MUSIC Group
BEHRINGER
