Recent content by Andy Turner

I want to make or buy a shelf that will go on the side of my mixing desk flight case for my laptop. I saw a solution some time ago based on a bracket-like thingie that would sit on the side of the flight case, - sliding over the aluminum extrusion. Has anyone heard of this or can you help me...

That is also an option yes but I still would like to have my PA taking care of limiting and in rare cases streching SPL :0)

Thank you Alexander for sharing :). I must admit that I have never heard of anyone using Lab.gruppen presets having problems related to limiters. What I meant was that in the case of d&b that the original amps will give more SPL due to the heavy engineered limiters including e.g. Dynamic eq.

I have had luck asking Powersoft for unlocked presets - but transscribing filter- settings between different dsp models will not necessarily give you a precise copy. I didn’t check to see if the limiter settings from Powersoft was open. I believe d&b uses ‘dynamic’ eq with their limiters and to...

Hi Alexander, Looking forward to hearing from you :0) /Cheers, Andy

I read somewhere that there is a substantial difference between the original d&b amp presets and Lab Gruppen IDP amp presets for d&b Q series subs. I have heard both and noticed a lot more output on the Q subs on a Lab IDP than on a d&b D12 amp. While making presets for my d&b speakers on a...

The only reason I sold mine was that they where too big for the type of jobs I do. I am now using d&b Q7. Good for one man setup. The sound from the PM90 is great and lots of SPL.. Cheers, Andy

4 x Xoc1 TH-18 Subs Tapped horn type loaded with B&C 18SW100. Location: Denmark Asking price: EUR 2.400 for all 4, but bids are welcome on PM. See TH-18 Flat to 35Hz thread. 100w measurement at 10 meters: Painted with Tuff Cab Pro. M20 Top hat in two of the subs. Casters on the back. -...

SOLD ! A pair of Peter Morris DIY MID HIGH tops for sale. See the NEW DIY Mid High thread for further details or call me or PM me. 2 x 12 RCF MB12N351 in folded horns and 1.4 BMS 4594 HE Coax. This is a 3 way/2 way active top that sounds fantastic and goes very loud. They are about 35kg...

Would anyone be interested in buying a pair of these boxes? Drivers are: BMS 4594HE with passive filter and RCF MB12N351 Pole-mount Painted with Black Tuff Cab Pro Speakon 4 Used once for theatre with Powersoft K dsp. Asking price is 2500 euro + shipping. Negotiable :0) Powersoft K6 and K8...

Been doing some measurements with my new Audiometica Clio Pocket set, and did some intense listen and measuring at different levels in a very big room. I came to the conclusion that I got a better result moving the microphone around to different listening positions in the room to hunt those...

Ok. so tried to put 8.2 Ohm in series with the HF and VHF, but the changes in frequency response was surprisingly small. I am still having issues with a sharp dip at 4.8 kHz, which is something going on with the HF section, and the a strange rise/peak at 14 kHz. Both 'findings' are present even...

I have now measured the component values, and they are same as yours, and according to this: Have measured Ohms values with a multimeter and got 6.8 Ohm on the HF and 8.5 Ohm on the MF. I can't seem to find the RE data on BMS website and I don't know if that is normal for a 16/16 Ohm version...

Appreciate your thoughts and input - thanks a lot. I tried many different approaches of measuring, - not including the free space 4m thing yet though :0) All methods showed the same pattern, except for the off-axis measurements - thus the idea of trying out the power response approach...

Marjan: Thanks. I have tried reversing the polarity on the VHF section only on the coax, and the dip between the HF and VHF got much worse(red) . Further, - the dip in the 650 Hz range is a bit strange also. When I use the same crossover settings on a DBX drive rack PA+ and a 4 channel...