I'm getting myself a power conditioner in january, a Furman PL-Plus CE below :
http://www.furmansound.com/product.php?div=03&id=PL-PLUSCE
I'm running two JBL MPA750 amps one bridged per SRX728S sub, a Yamaha P7000S amp running two JBL MRX515 cabs for dj monitors, one Stanton SA.3 dj mixer, one JBL MPX1200 running two Peavey UL215H cabs (USA equivilent is basiacally the SP4 cabs), two dmx scanner lights, one Martin Magnum 1200 fog machine, two Technics SL1210 turntables and a Dbx Driverack. Now i'm wanting to know, I know I don't plug the amplifiers into the power conditioner, but do I plug everything else into it? Or do I plug just the audio equipment and not the lighting? Oh and how long can power cables be without causing a problem? Say if I ran 20ft cables from the lighting to the Furman conditioner and other cables from the dj mixer and turntables shorter than that, would I experience any problems?
http://www.furmansound.com/product.php?div=03&id=PL-PLUSCE
I'm running two JBL MPA750 amps one bridged per SRX728S sub, a Yamaha P7000S amp running two JBL MRX515 cabs for dj monitors, one Stanton SA.3 dj mixer, one JBL MPX1200 running two Peavey UL215H cabs (USA equivilent is basiacally the SP4 cabs), two dmx scanner lights, one Martin Magnum 1200 fog machine, two Technics SL1210 turntables and a Dbx Driverack. Now i'm wanting to know, I know I don't plug the amplifiers into the power conditioner, but do I plug everything else into it? Or do I plug just the audio equipment and not the lighting? Oh and how long can power cables be without causing a problem? Say if I ran 20ft cables from the lighting to the Furman conditioner and other cables from the dj mixer and turntables shorter than that, would I experience any problems?
Last edited: