X32 Discussion

re: X32 Discussion

Loren Aguey said:
Our X32 arrived today but I won't have time to install it until tomorrow. I was trying to configure the console before hand with the offline editor but can't seem to find a save function that would allow me to transfer to the console once I install it. Can anyone help me out with this?
Click to expand...
Sorry, that has been one of the small disappointments so far, the offline editor simply doesn't exist, so far it is only a limited remote control.
 
re: X32 Discussion

I also get the app freezing when in offline mode and after I've not used it for a few minutes. Was OK on the earlier version

Per Søvik said:
Still no eq, which I'm afraid mstill renders it somewhat useless for the setup phase. The great thing with a remote like this is to be able to go out in the room or up on stage and tune the PA and monitors, so hopefully that part will be on the next update. .......please........
The scribble strip bit is really handy when at the console, much easier than using the console :thumbup:
I would really like to have scenes and USB-stick playback/record available as well. .....please....please.....

Thank you development team and keep up the good work :thumbup:

Edit; oh yeah, and it crashes when resumed after the screen has gone blank, but I'm just downloading the latest firmware update for the iPad, so I'll try when that one is installed
New update, still crashing with iOS 6.0 installed.
Click to expand...
 
re: X32 Discussion

Spenser Hamilton said:
We got our X32 yesterday, I can't quite say I care what any of the local guys are saying but a couple SL users and one LS9 user have already admitted a hint of jealousy. I can't wait to put this thing into service, I've got one of my regular band's lined up to do a few rehearsals with the board in the next few weeks.

Has anybody looked into cases for these yet?


Sent from my iPhone
Click to expand...

Yep !!

I ordered them from Multicaisse in MTL. They will be similar to the G-Tour from Gator - Wheels and Doghouse.

BTW, I have spend a good hour searching with poor result. I would like to use a usb key to put music and pushed in the PA. The songs are all .wav , the tape cassette starts and stop ... I remember reading something similar but I can't find it....

If someone know how I can make it work, please Help !

OT
 
re: X32 Discussion

Well the pictures I promised from my first live gig with my X32 didnt work out too well :( lucky im not a photographer.

The good news is that there was a film crew there that I provided a 8 way mix to and also a professional photographer.

The video can be seen here and all the sound was recorded using the x32.

The Real Street Party

I gave the video crew the FX on its own channel but when they edited the sound they haven't used it and the gaga tribute was recovering from a cold so wasn't up to standard.

Kev :)
 
re: X32 Discussion

Per Søvik said:
Sorry, that has been one of the small disappointments so far, the offline editor simply doesn't exist, so far it is only a limited remote control.
Click to expand...

Hi Per,

Thanks for the response. I can live with out it for now but hopefully its coming sooner than later. If anyone in NYC wants to come see/hear the X32 in action PM me and you can swing by. I will be installing it tomorrow.

Or just show up to Shrine in Harlem and silently judge me from afar. I'm usually there Thursday through Saturday. The best bet is catching the acts from 9pm to midnight as earlier than that we do mostly quiet jazz acts with not a whole lot if anything through the PA.
 
re: X32 Discussion

Hi there
Just set up my iPad with XiControl and got it connected via Apple AirPort Extreme. Just having a problem with the matrix-mains layer, can't get faders and therefore no control. Is this a known issue, if not any suggestions to a solution.
Thanks in anticipation.
Paul
 
re: X32 Discussion

Paul Kerrison said:
Hi there
Just set up my iPad with XiControl and got it connected via Apple AirPort Extreme. Just having a problem with the matrix-mains layer, can't get faders and therefore no control. Is this a known issue, if not any suggestions to a solution.
Thanks in anticipation.
Paul
Click to expand...

Further update.
Found cause of problem with the Mtx-Main layer. The "C" & "LR" busses are reversed. If I go offline I can fix the a;;ovation, but when I go back online it reverts the scribble script names, colours and icons. Any ideas or suggestions would be gratefully appreciated.
Paul
 
Last edited:
re: X32 Discussion

Othmane Alaoui said:
Yep !!

I ordered them from Multicaisse in MTL. They will be similar to the G-Tour from Gator - Wheels and Doghouse.

BTW, I have spend a good hour searching with poor result. I would like to use a usb key to put music and pushed in the PA. The songs are all .wav , the tape cassette starts and stop ... I remember reading something similar but I can't find it....

If someone know how I can make it work, please Help !

OT
Click to expand...

Have you turned it up, on aux 7&8?
 
re: X32 Discussion

So X32 arrived on Thursday night but unfortunately a couple of the scribble strip clear plastic covers over the displays were cracked, not badly but just annoying (QC!). Spent Friday discussing what to do about it with the supplier and finally agreed some money off. Friday night used it at a gig with virtually no prep! Once I had got my head around the DCA's (I'm a group man!) we were up and running. It's a 4 piece band, we ran 18 channels and controlled the whole thing off 3 iPad's, one FOH and drums and keys using 2 to do their own monitor mixes. It's absolutely brilliant!!!!
 
re: X32 Discussion

i had a problem with my one too that i found was due to the software that created the wav file !! when I tried another application it worked fine. (audiograbber worked)
Kev
 
re: X32 Discussion

Baudouin Le Clercq said:
So...
One point pissed me off...
I had a digital noise in channel 16 at full volume.
I wrote a pm to Joe Sanborn from Behringer.
He answered quickly to me and I received a procedure to fix my problem.
I've done what was said step by step.
And.......
Everything is now perfect :)
A big up to Joe and to Behringer :thumbup::thumbup::thumbup:
Click to expand...

Hi Baudouin,
Can you please copy down here the procedure you recieved ?
It would be helpfull for others :razz:
Tks.
 
re: X32 Discussion

Well....I am having a little problem and cant seem to figure it out. I had been using XControl 0.5 with the X32 (1.08) seamlessly. Everything worked as it should. I just downloaded the new XControl 0.7 and got it up and running but when I try to connect it to the console it throws up an error saying incompatible console firmware even though I am at the latest version.

XControl.jpg
 
Top Bottom